FEATURES

• 24V class 2 control circuit with 40VA transformer to protect against short circuit
• External radio control terminal strip
• Low friction powder metal limit cam nuts with fully adjustable rotary type
  limit switch assembly
• Three button open-close-stop control station Nema-1
• Continuous duty industrial motor with overload protection
• Motor removable without affecting limit settings
• Heavy duty 5LV-belt
• #41 roller chain and sprockets on all internal drives
• Adjustable friction clutch
• Mechanical brake
• Solenoid brake(optional PRO-JB)
• #50 roller chain and sprockets on final drive
• 3/4″ permanently lubricated and sealed ball bearings on pulley shaft
• 1″ permanently lubricated and sealed bearings on final drive shaft
• Emergency disconnect with electrical cut-out switch for manual operation
• Chain keeper
• Left or right hand mounting
• Baked on dark grey coat finish
• Shipping weight of 95 lbs

3 CONTROL CIRCUIT OPTIONS AVAILABLE

1)

• Heavy duty reversing contactor with mechanical and electrical interlock incorporating the UL325(2010)interface module.
• C2 factory wiring standard (constant pressure close)
• B2 wiring can be field set by moving 1 jumper and installing Micanan monitored fail safe photo-eyes (supplied) or (optional) Micanan compatible monitored fail safe electric edge

2)

• Full fonction Smart 10.0 Logic control board featuring on-board receiver with antenna, enhanced program selection to include B2,C2, D1, E2, T & TS and supplied with Micanan monitored fail safe photo-cells or (optional) Micanan monitored fail safe electric edge
• D1 factory pre-set mode of operation standard (constant pressure open and)

3)

• Heavy duty reversing contactor with mechanical and electrical interlock. (Not available in US or other areas where UL325(2010)is mandated)
• C2 factory wiring standard
• B2 wiring can be field set by moving 1 jumper.
• Provisions for standard reversing devices.