Commercial / Industrial continuous duty Trolley operator with brake

Designed for use on commercial / industrial sectional overhead doors with standard lift tracks.



  • 2 year Warranty
  • 3 Control Circuit Options Available:
     (M) Heavy duty reversing contactor with mechanical & electrical interlock incorporating the New UL325 (2010) Interface Module.
    *C2 factory wiring standard (constant pressure close), B2 wiring can be field set by moving 1 jumper and Installing Micanan monitored fail safe photo-eyes (supplied) or (optional) Micanan compatible monitored fail safe electric edge
    2- (E) Full Function Sman 10.0 Logic control board featuring on-board receiver with antenna, enhanced program selections to include B2, C2, D1, E2, T & TS and supplied with Micanan monitored fail safe photo-cells or (optional) Micanan monitored fail safe electric edge
    *D1 factory pre-set mode of operation standard (constant pressure open & close)
    3- Heavy duty reversing contactor with mechanical & electrical interlock.
    (Not available in US or other areas where UL325 (20l0) is mandated)
    C2 factory wiring standard, B2 wiring can be field set by moving 1 Jumper.
    Provisions for standard reversing devices.
  • 24V class 2 control circuit with 40VA transformer to protect against short circuit
  • External radio control terminal strip
  • Low friction powder metal limit cam nuts with fully adjustable rotary type limit switch assembly
  • Three button open-close-stop control station Nema·l
  • Baked on dark grey coat finish
  • Continuous duty industrial motor with external reset overload protection
  • Motor removable without affecting limit settings
  • Low headroom clearance design (9.5″)
  • Heavy duty 5 L V-belt
  • #41 roller chain & sprockets on alll internal drives
  • Adjustable friction clutch
  • Solenoid brake standard
  • ¾” permanently lubricated & sealed ball bearings on pulley shaft
  • 1″ permanently lubricated & sealed ball bearings on final drive shaft
  • Emergency quick release disconnect for manual operation
  • #48 roller chain drive on 1/3, ½ HP models
  • #41 roller chain drive on ¾, 1 HP models
  • Trolley track for doors up to 12′ standard
  • Door speed 12″ per second
  • Shipping weight 85 Ibs (excludes rails)
Logic board



  • On-board open, close, stop push buttons.
  • Built-in 372 Mhz radio receiver
  • Programable timer to close
  • Programable mid stop
  • Maximum run timer
  • 1.5 sec time delay reverse
  • Programable delay on close
  • On-board fuse protection
  • Plug in board option
  • New vision lights
Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.