Speed Commander Series Doors

Correct Door Service > TNR Industrial Doors > Speed Commander Series

The Hörmann high performance doors Speed-Commander speed up workflow and reduce energy costs. The fabric doors are designed with protection features that increase efficiency and sustainability. A standard built-in light curtain eliminates the need for additional protection mechanisms, such as a reversing edge, which supports easy installation and minimal maintenance. Speed-Commander doors offer a better environmental control between work areas and varying temperatures due to their fast opening and closing speeds. They are ideal for interior locations and special applications.

1400 SEL Model

Speed-Commander™ 1400 SEL With SoftEdge – Interior Door Openings

  • The innovative SoftEdge door technology prevents damage and resulting downtime of the door system. Extensive repairs, such as those with rigid door profiles, become unnecessary. A radio crash switch is concealed in the SoftEdge bottom profile. If the bottom profile is pushed out of the side guides by a crash, the radio crash switch transmits a signal to the control and the door is stopped immediately. Thanks to this technology, the door can be operated for at least up to 3 years without the need for maintenance, regardless of the number of door cycles.
  • The Speed-Commander™ 1400 SEL19 comes in a sectional panel design.  The panels are connected using aluminum profiles and have specially designed edges that allow the panels to slide easily into the horizontal aluminum profiles for fast replacement.
  • Standard on the Speed-Commander™ 1400 SEL19 is a light grid built into the guide tracks up to 8’0″ high. Completely free of coil cords, the light grid provides a thorough wall of protection for personnel and equipment at the doorway, as compared to other doors that use only photocells. Full perimeter draft seals provide dust and odor containment, as well as general environmental control.
  • The Speed-Commander™ 1400 SEL19 comes with the next generation, Smart Start™ NXT NEMA 4X control box, which accepts 208 v to 575 v / 3-phase / 60 Hz input voltage.  The updated control box has a simplified wiring configuration, is more powerful, and has fewer components and cables as compared to the original Smart Start™.  Single-phase control box is optional and has our Smart Start™ NXT wiring but with a NEMA 3 rated control box (1-phase, 230 v only).
  • Optional UPS Emergency Battery Pack – Available with doors equipped with our 230 v / 1-phase control box. With this option, if power is lost to the door, the UPS emergency battery pack automatically opens the door once to allow personnel to quickly exit the area.

For more information, consult the product Brochure.

1400 SEL Clean Master Model

Speed-Commander™ 1400 SEL Clean-Master

  • The Speed-Commander™ 1400 SEL19 Clean-Master 20 Pa tightly seals door openings in clean room applications to prevent air movement, and the fast opening speed of up to 80″ per second greatly increases protection from contamination between two areas.  Low-profile steel guide tracks are free of moving parts, promoting a pure environment.  Stainless steel guide tracks are available for customers that demand the ultimate in clean.
  • Standard on the Clean-Master 20 Pa is a light grid built into the guide tracks up to 8’0″ high.  Completely free of coil cords, the light grid provides a thorough wall of protection for personnel and equipment in the doorway, as compared to other doors that use only photocells.  The light grid also eliminates the need for a panel reversing edge, which is typically vulnerable to damage, resulting in a reduction in maintenance and downtime.  The absence of a coil cord eliminates a possible source of contaminants.
  • A special UPS emergency battery pack is an option that provides peace-of-mind in case of a power failure.  If power is lost to the door, the UPS emergency battery pack automatically opens the door once to allow personnel to quickly exit the area.  This low maintenance design is free of springs, counterbalance systems and other high maintenance parts that are typically required for emergency opening.  When the battery is low, an alarm sounds to signal time for a replacement.  Replacing the battery is a simple process that takes just a few minutes.  This option is only available with doors equipped with our 230 v / 1-phase control box.

For more information, consult the product Brochure.

1400 SEL Cool Master Model

Speed-Commander™ 1400 SEL Cool-Master

  • This is the ideal door for energy conscious, 24/7/365 applications in agricultural, medical and cooler distribution facilities.  The fast operating speeds allow for a constant flow of traffic without compromising energy control and efficiency.  An advanced 3 mm thick gray foam panel material maintains flexibility to +33 degrees F and helps to keep condensation to a minimum in cooler to ambient areas.  Our unique sectional panel design makes it possible to replace panels easily for minimal downtime.
  • Standard on the Cool-Master is a light grid built into the guide tracks up to 8’0″ high.  Completely free of coil cords, the light grid provides a thorough wall of protection for personnel and equipment in the doorway, as compared to other doors that use only photocells.  The light grid also eliminates the need for a panel reversing edge, which is typically vulnerable to damage, resulting in a reduction in maintenance and downtime.  Full perimeter draft seals provide additional environmental control.
  • The Cool-Master comes with the next generation, Smart Start™ NXT NEMA 4X control box, which accepts 208 v to 575 v / 3-phase / 60 Hz input voltage.  The updated control box has a simplified wiring configuration, is more powerful, and has fewer components and cables as compared to the original Smart Start™.

For more information, consult the product Brochure.

1400 SEL Food Master Model

Speed-Commander™ 1400 SEL Food-Master

  • The Food-Master design allows you to select only the stainless steel options your application requires.  Able to conform with all industry requirements, the following components are available in stainless steel, making it possible to conveniently build a Food-Master door without paying for unnecessary stainless options:  Roll tube / shaft,  door / motor cover,  guide tracks and all hardware.
  • Standard on the Food-Master is a light grid built into the guide tracks up to 8’0″ high.  Completely free of coil cords, the light grid provides a thorough wall of protection for personnel and equipment in the doorway, as compared to other doors that use only photocells.  The light grid also eliminates the need for a panel reversing edge, which is typically vulnerable to damage, resulting in a reduction in maintenance and downtime.  Amazingly, the light grid remains an effective protection device even following wash-down.
  • Two effective panel materials are available on the Food-Master.  The standard is a 40 oz. / sq. yard white nylon-reinforced, puncture resistant PVC, perfect for basic applications.  An optional 90 oz. / sq. yard 100 percent FDA approved white polyurethane panel material is available when optimum compliance is needed.  A vision area is unavailable with the 90 oz. material to maintain FDA acceptance.  With either material, the panel maintains stability via spring steel stiffeners located in completely sealed panel pockets.

For more information, consult the product Brochure.

1500 Compact Model

Speed-Commander™ 1500 Compact Interior Door Openings

  • The Speed-Commander™ 1500 Compact has a welded panel with spring steel stiffeners for stability.  The door seals extremely well due to the narrow insertion area on the guide tracks where the panel runs inside, and guide track draft seals assist with forming a tight seal around the door panel.
  • Elegant and compact aluminum guide tracks only require 5-1/2″ of clearance on either side of the door opening, and a powerful UL rated, high cycle tubular motor requires only 17-3/4″ headroom clearance. The result is streamline and modern-looking.
  • More and more installations are requiring that the door control box is installed out of the reach of passersby or completely away from the door in a central location. For these types of applications, our optional remote keypad is the ideal accessory; it allows for the door control box to be remotely installed while still having the ability to operate all control functions through a compact, 3″ x 5-1/2″ keypad integral on either the left or right guide track at 51″ up from the bottom of the track.

For more information, consult the product Brochure.

Downloads

Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.