Commercial / Industrial continuous duty belt drive horizontal sliding door operator

Designed for use on commercial/industrial sliding doors or sliding fire doors



  • 2 year Warranty
  • 3 Control Circuit Options Available:
    1- (M) Heavy duty reversing contactor with mechanical & electrical interlock incorporating the new UL325 (2010) Interface Module.
    *C2 factory wiring standard (constant pressure close), B2 wiring can be field set by moving 1jumper and installing Micanan monitored fail safe photo-eyes (supplied) or (optional) Micanan compatible monitored fail safe electric edge
    2- (E) Full Function Smart 10.0 Logic control board featuring on-board receiver with antenna, enhanced program selections to include B2, C2, D1, E2, T & TS and supplied with Micanan monitored fail safe photo-cells or (optional) Micanan monitored fail safe electric edge *D1 factory pre-set mode of operation standard (constant pressure open & close)
    3- Heavy duty reversing contactor with mechanical & electrical interlock.
    (Not available in US or other areas where UL32S (2010) is mandated)
    *C2 factory wiring standard, B2 wiring can be field set by moving 1 jumper.
    Provisions for standard reversing devices.
  • 24V class 2 control circuit with 4CNA transformer to protect against short circuit
  • Extemal radio control terminal strip
  • Low friction powder metal limit cam nuts with fully adjustable rotary type limit switch assembly
  • Three button open-close-stop control station Nema-1
  • Continuous duty industrial motor with overload protection
  • Motor removable without affecting limit settings
  • Heavy duty SL V-belt
  • #41 roller chain & sprockets on all internal drives
  • Adjustable friction clutch
  • Solenoid brake standard
  • 3/4″ permanently lubricated & sealed ball bearings on pulley shaft
  • 1″ permanently lubricated & sealed ball bearings on final drive shaft
  • Emergency quick release disconnect for manual operation
  • ’41 roller chain drive on trolley rail assembly
  • Heavy duty sliding door hardware & hanging brackets included
  • Trolley track for doors up to 12′ standard
  • Door speed 12″ per second
  • Bi-parting door modification available (optional)
  • Baked on dark grey coat finish
  • Shipping weight 105 lbs. (excludes rails)
Logic board


  • Sliding Door-Pro SD Logic BoardOn-board open, close, stop pushbuttons
  • Built-in 372 Mhz radio receiver
  • Programmable timer to close
  • Programmable mid stop’ Maximum run timer
  • 1.5 sec time delay reverse
  • Programmable delay on close
  • On-board fuse protection.
  • Plug in board option.
  • New vision lights
Contact Us

We're not around right now. But you can send us an email and we'll get back to you, asap.